Home > School Kids Activities and Crafts > DIY Newton’s Cradle STEAM Project explaining Newton’s Laws

DIY Newton’s Cradle STEAM Project explaining Newton’s Laws

I admit that at school physics was my poorest science subject, I just didn’t understand the fundamentals having had cover teachers during critical parts of the curriculum and I struggled, that was until I started teaching the subject during my teacher training and I taught myself the fundamentals in a way that I could get it and understand and then could pass on to my students. Newton’s laws are of course one of the fundamental aspects of physics and the Newton’s Cradle shows some of the laws perfectly.

DIY Newton's Cradle from a shoe box

Newton’s Cradle is set up in such a way to show the laws of conservation of energy, conservation of momentum and friction. In the traditional Newton’s Cradle steel or titanium balls are used and for large scale models billiard balls and bowling balls are used as although we consider them to be rigid, they are fairly elastic in the sense that they move for our mini Newton’s Cradle we’re going to use some wooden beads – although not as efficient they will work to demonstrate what is happening.

We have used the beads from our Spielgaben Set which is a perfect resource for educators including home educators over the years we have used it for early years with activities like pattern making and name recognition but in this STEAM activity, it’s being used at a higher level to explain more complex science areas.

We have included links to affiliate products and resources that we recommend.

Materials needed for DIY Newton’s Cradle

Shoe Box
5 Wooden Beads if you don’t have a Spielgaben Set then something like a children’s threading set beads would work really too
String
Ruler

How to make your DIY Newton’s Cradle

Start of by cutting the shoe box to form a frame that the bead will be able to hang in – I used a kids shoe box for the model and cut out a frame from all 4 sides.

DIY Newton's Cradle from a shoe box

With the frame in place, I measured how long each ball needed to be from the rim of the Frame in the case of ours around 10 cm

DIY Newton's Cradle from a shoe box

I then measured pieces of string 3x that length to ensure that there was plenty of room for knotting and making sure that beads could be adjusted

DIY Newton's Cradle from a shoe box

Taking 2 pieces of string per bead thread through and then tie securely.

DIY Newton's Cradle from a shoe box

Starting with the centre bead place it equal distance from each frame and secure to the frame with masking tape.

With the next bead on the left measure your length of string on one side and then put in place. Once it’s in place tape it with masking.

DIY Newton's Cradle from a shoe box

Then place the next 3 beads into place.

Check the alignment – this does take some tweaks to get them right and until they are exactly right in a straight line the model won’t work as well as a store bought Newton’s Cradle.

You can see in the picture above that with just a few of the balls out of line our video shows that they only follow the momentum through once and then it separates.

With adjusting you can get it to work – we managed to get ours to carry through a few times with fine adjustments.

DIY Newton's Cradle from a shoe box

Hands-on Science For Kids

I firmly believe in teaching kids through hands-on activities and practical application leaving the worksheets behind and textbooks as a resource for reading around the subject. Activities like this help children understand concepts that can be difficult to understand through diagrams and worksheets, putting it together they can see where energy is lost and momentum as they adjust the beads.

Fizz, Pop, Bang, 40+ Hands-on Science and Math Activities for children aged 3 to 8Our collaborative ebook Fizz, Pop, Bang! is produced with ideas for hands-on science and maths ideal for kids between 3 and 8. Buy the maths and science ebook today!

The science bit

Newton’s cradle demonstrations the laws of motion particular those of conservation of energy and momentum. It also helps to understand friction. When the first ball is pulled up and let go the energy and momentum is transferred from that ball through to the other balls and to the end ball which will go out from the set of balls with the same speed as the first ball returning it will transfer that energy and momentum through the balls.

The balls do slow down over time this is because of lost energy due to friction and also elastic energy.

This post is part of the A – Z of Science Series organised by Frogs Snails and Puppy Dog Tails.

A-Z-Science-Experiments-for-kids-994x1024

Author
Cerys Parker

Cerys is a marine biologist, environmental educator, teacher, mum, and home educator from the UK. She loves getting creative, whether it is with simple and easy crafts and ideas, activities to make learning fun, or delicious recipes that you and your kids can cook together you'll find them all shared here on Rainy Day Mum.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.